Induction Unit for suspended ceiling

layer

DID312

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems. The condensate drip tray is useful if the temperature temporarily falls below the dew point.

  • Preferably for room heights up to 4.00 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • High comfort levels due to low airflow velocity in the occupied zone
  • Three nozzle variants to optimise induction based on demand
  • Hinged, removable induced air grille in four designs


Optional equipment and accessories

  • Control system
  • Additional casing for extract air
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC

Kühlleistung: bis 1.830 W Heizleistung: bis 1.240 W

read more

layer

DID632

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems

  • Preferably for room heights up to 4.0 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • Four nozzle variants to optimise induction based on demand
  • Hinged, removable induced air grille in four designs


Optional equipment and accessories

  • Control system
  • Additional casing for extract air
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC
  • Adjustable air control blades for air direction control
  • With an extended border also suitable for freely suspended installation

Kühlleistung: bis 2.450 W Heizleistung: bis 2.970 W

read more

layer

DID642

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems

  • Preferably for room heights up to 4.0 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • Five nozzle variants to optimise induction based on demand, including adjustable twin nozzles, i.e. one pair of nozzles with different diameters
  • Hinged, removable induced air grille in two designs


Optional equipment and accessories

  • Control package
  • Additional casing for both supply air and extract air, or for additional supply air
  • Supply air and extract air units upon request
  • Adjustable air control blades for air direction control
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC
  • Adjustable air control blades for air direction control

read more

layer

MFD

With the TROX multifunctional beams type MFD room air is inducted via the heat exchanger (2- or 4-duct system), which is mounted above the nozzle pipe.
 
The induction air is heated or chilled when passing through the heat exchanger. Mixed with the supply air it is discharged to the room as a free stream following the profiled wings. The suspended lighting sail is longer than the diffuser unit and therefore ensures even illumination of the room. Depending on the type of lighting fixture direct or indirect lighting rates can be guaranteed.
 
All fronts are masked with shapely cover plates following the curves.

read more

DID 600B-L

read more

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +61 (02) 8923 2551

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +61 (02) 8923 2551

Contact

We are here for you

Please specify your message and type of request.
Tel.: +61 (02) 8923 2551

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +61 (02) 8923 2551