Type Modulating actuators  

For moving the damper blades of shut-off dampers to any position

Modulating actuators for Type AK or AKK shut-off dampers

  • Various damper blade positions
  • Supply voltage 24 V AC/DC
  • Control input signal: Voltage signal 2 – 10 V
  • Mechanical stops
  • Retrofit possible

Actuator LM24A-SR 00132720_0


  • Application
  • Description

Application

  • Actuators for variable adjustment
  • For moving the damper blades of Type AK and AKK shut-off dampers to any position

Parts and characteristics

  • Mechanical stops for limiting the damper blade positions
  • Supply voltage 24 V AC/DC
  • Overload protection
  • Setpoint value signal 2 – 10 V DC
  • Release button to allow for manual operation

Technical information

Function, Technical data, Produktbeziehungen

  • Function
  • Technical data

Functional description

The actuator moves the blade of a shut-off damper to any position between the OPEN and CLOSED positions.

The control input signal is a voltage signal.

Control options and effect of actuator action in case of factory setting

Order code detail Function Control Direction of rotation
Order code detail Function Control 1 2

B20

Variable

Variable control



B20

Open/close

1-wire control, 2-wire control

OPEN

CLOSED


Actuators LM24A-SR and LM24A-SR-F

Supply voltage (AC)

24 V AC ± 20 %, 50/60 Hz

Supply voltage (DC)

24 V DC ± 20 %

Power consumption – load

1 W

Power consumption – idle

0.4 W

Power rating

2 VA

Torque

5 Nm

Running time for 90°

150 s

Position feedback

2 – 10 V DC, 1 mA

Control signal

2 – 10 V DC, Ra > 100 kΩ

Connecting cable

4 × 0.75 mm², 1 m long

IEC protection class

III (protective extra-low voltage)

Protection level

IP 54

EC conformity

EMC to 2014/30/EU, RoHS to 2011/65/EU

Operating temperature

–30 to 50 °C

Weight

0.5 kg


Variants

  • Variants
Actuator LM24A-SR 00132720_0


Any attachments are to be defined with the order code of the shut-off damper.

B20

Application

  • Actuator LM24A-SR
  • Stepless adjustment as well as opening and closing of shut-off dampers

Parts and characteristics

  • Supply voltage 24 V AC/DC
  • Control input signal: Setpoint value signal 2 – 10 V DC, corresponds to the total rotation range (90°), working range is limited by mechanical stops
  • Output: Position feedback 2 – 10 V
  • Mechanical stops
  • Direction of action can be reversed
  • Release button to allow for manual operation

Actuators for the variable adjustment of shut-off dampers

Order code detail Actuator Supply voltage
Order code detail Part number Type Supply voltage

B20

M466DT6 with M536AJ4

LM24A-SR

24 V


Electrical connection

  • Electrical connection
LM24A-SR, connecting cable core identification 00114398_0.
1 ⊥, –: Ground, neutral
2 ~, +: Supply voltage
3 Y: Setpoint value signal
5 U: Position feedback

LM24A-SR and LM24A-SR-F

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +61 (02) 8923 2551

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +61 (02) 8923 2551

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +61 (02) 8923 2551

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +61 (02) 8923 2551