00136373_0
Expansion module EM-LIGHT


00133883_0
Connection socket for lighting


00133198_0
Buttons on the control panel to switch the lighting on/off
① Fume cupboard lighting


Beleuchtungsschaltung über Bedieneinheit 

EASYLAB Laborabzugsregelung

00136373_0
00133883_0
00133198_0

EM-LIGHT

For the simple connection of lighting to an EASYLAB fume cupboard controller

Expansion module with a wired socket for the connection of lighting and for switching the lighting on/off using the control panel

  • Lighting can be switched on/off using an EASYLAB control panel
  • Pluggable connection of a fume cupboard or room lighting (230 V AC)
  • Only in connection with expansion module EM-TRF or EM-TRF-USV
  • Socket on the outside of the controller casing

  • Plug-in connection with the cable of the lighting, e.g. for laboratory furniture


General information


Application

  • Expansion module for EASYLAB fume cupboard controller based on the TCU3 controller board
  • Simple connection of a light (230 V AC) to a switched socket on the controller casing
  • Enables switching the fume cupboard lighting on/off on the EASYLAB operating unit of the fume cupboard control system
  • Requires expansion module EM-TRF or EM-TRF-USV
  • Suitable for factory installation or retrofitting Area of application:
  • For EASYLAB fume cupboard controllers


Special features

  • Control of fume cupboard lighting using the control panel
  • Simple connection of light to a wired socket
  • Socket is on the outside of the casing (no need to open the casing for connecting)
  • Plug-in connection cable of the fume cupboard lighting is simply connected to the socket


Parts and characteristics

  • Built-in socket type WAGO WINSTA Midi Type 770
  • Socket with plug-in connection cables for 230 V AC


Construction features

  • Socket matched to installation opening in the controller casing
  • Push-in type socket, no tools required
  • Cables suitable for connection to EASYLAB TCU3 with EMTRF or EM-TRF-USV
  • Cables with wire end ferrule and text label marking the terminal to be used


Commissioning

  • When ordering an air terminal unit with EASYLAB controller - use order option S: EM-LIGHT installed, wired, configured, connected and ready for operation
  • For retrofitting: installation and configuration required


Useful additions

  • EasyConnect: Configuration software for commissioning and diagnostics of the EASYLAB components
  • Counter plug type WAGO WINSTA MIDI 770-113 (can be ordered as EM-CPL)


Safety instruction

For safety reasons, opening the controller casing without tools is not permitted when using a 230 V mains supply. A safety latch with warning label is available, which can be ordered as EM-TRF
accessory (A00000055540). When an EASYLAB controller (ELAB component) with transformer module EM-TRF or EMTRF-USV is delivered, the safety latch is mounted and not required in addition.

Technical information

Function, TECHNICAL DATA, SPECIFICATION TEXT, ORDER CODE, Related products

  • Function
  • TECHNICAL DATA
  • SPECIFICATION TEXT
  • ORDER CODE
EM-LIGHT 00133880_0
① Mounting socket
② Text label with ID of the terminal on the board of the EASYLAB TCU3 and the EM-TRF or EM-TRF-USV


The EM-LIGHT expansion module enables the on and off switching of a light operated with 230 V AC at the EASYLAB operating unit. The light is connected via a terminal socket to a plug (type: WAGO WINSTA Midi Series 770). The EM-LIGHT expansion module is connected to a digital output of the EASYLAB TCU3 controller as well as the 230 V connection terminals of the EM-TRF or EM-TRF-USV expansion modules. The light is switched on and off via the control unit of the controller.


This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design programme.


Expansion module for the EASYLAB fume cupboard controller TCU3 (connected to 230 V AC), for easy connection of a light (230 V AC) to a switched connection socket. Operation of the light (typical fume cupboard lighting) on the control panel of the fume cupboard controller.

Special characteristics

  • Control of fume cupboard lighting using the control panel

  • Simple connection of light to a wired socket
  • Socket is on the outside of the casing (no need to open the casing for connecting)
  • Plug-in connection cable of the fume cupboard lighting is simply connected to the socket


Technical data

  • Supply voltage 230 V AC, connection to EM-TRF or EM-TRF 

    UPS
  • Maximum switching current 8 A
  • Operating temperature 0 - 50 °C
  • Degree of protection IP 20


1 Product

EM-LIGHT Connection socket for lighting, switchable on control panel (only for ELAB component, EASYLAB fume cupboard controller; also requires EM-TRF or EM-TRF-USV)

Note:

This is the order code for retrofitting the expansion module into a VAV control unit with EASYLAB control component. Usually, the expansion module is ordered with the initial order for the VAV controller for fume cupboard control, via the order code of the basic unit under the section Expansion modules with the order code S.


 

Installation details

  • Installation details

Commissioning with factory preparation

When ordering the EASYLAB controller with EM-LIGHT expansion module, the connection socket is installed and wired at the factory and the lighting control is activated in the configuration. The built-in socket for light switching is thus ready for operation.

Installation and commissioning for retrofitting

The prerequisite for retrofitting is an existing EM-TRF or EM-TRF-USV expansion module in the EASYLAB TCU3 controller for supplying the controller and the lighting via mains voltage.

For retrofitting:

  • Disconnect the EASYLAB controller TCU3 from power supply
  • Install and wire the EM-LIGHT expansion module in the basic casing
  • Use the EasyConnect configuration software to activate the lighting control button on the control unit

Downloads

product information

  • Product data sheet Type EM-LIGHT

    Product data sheet 370 KB pdf

certificates

  • Declaration of conformity or declaration of incorporation Type EM-LIGHT

    Declaration of conformity or declaration of incorporation 26 KB pdf

operation manuals

  • Installation and operating manual Type EM-LIGHT

    Installation and operating manual 910 KB pdf

TROX Services

production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +61 (02) 8923 2551

Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +61 (02) 8923 2551

Contact

We are here for you

Please specify your message and type of request.
Tel.: +61 (02) 8923 2551

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +61 (02) 8923 2551

TROX Logo
By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.
Cookie settings