NL | TROX Australia Pty Ltd

Acoustic louvre, variant NL-A

NL

With sound reduction characteristics

Acoustic louvres as a protection of air conditioning systems against the direct ingress of rain, leaves and birds into fresh air and exhaust air openings

Maximum width of 1800 mm, maximum height of 2250 mm
Low differential pressure due to aerofoil blades
Low air-regenerated noise
All aerodynamic data is measured in aerodynamics and acoustics laboratories
Absorption material faced with glass fibre fabric and retained by perforated sheet metal
Double bank of louvre blades for demanding acoustic requirements
Non-active section, without acoustic function, for a uniform appearance
Multi-section constructions for large dimensions

Optional equipment and accessories

Powder-coated

Application

Application

Acoustic louvres of Type NL for the fresh air and exhaust air openings of air conditioning systems
Protection against the direct ingress of rain as well as against leaves and birds
Recommended face velocity for fresh air openings: 2 – 2.5 m/s max.
Weather and noise protection with a compact-depth unit

Special characteristics

Two construction depths for normal and demanding acoustic requirements
Aerofoil blades
Absorption material retained by perforated sheet metal

Nominal sizes

B: 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650, 1800 mm
Width subdivided: 1950, 2100, 2250, 2400, 2550, 2700, 2850, 3000, 3150, 3300, 3450, 3600 mm
H: 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650, 1800, 1950, 2100, 2250 mm
Height subdivided: 2400, 2550, 2700, 2850, 3000, 3150, 3300, 3450, 3600, 3750, 3900, 4050, 4200, 4350, 4500 mm
Any combination of B × H
Other dimensions upon request

Description

Variants

NL: Acoustic louvre
NL-H: Double bank for demanding acoustic requirements
NL-D: Non-active section for a uniform appearance

Construction

S: Galvanised sheet steel
A: Aluminium

Parts and characteristics

Casing
Sound absorbing blades (NL, NL-D)
Bird mesh (NL, NL-D)
Blades (NL-D)
Rear blanking plate (NL-D)

Construction features

Aerofoil blades, 150 mm blade pitch
Casing with fixing holes for wall installation
Absorption material faced with glass fibre fabric and retained by perforated sheet metal (NL, NL-H)
Bird mesh 12 × 12 × 1 mm (NL, NL-H)

Materials and surfaces

Casing and blades made of galvanised sheet steel (S) or aluminium (A)
Perforated sheet metal to retain absorption material is made of galvanised sheet steel (NL, NL-H)
Bird mesh made of galvanised steel (NL, NL-H)
Absorption material is mineral wool (NL, NL-H)

Mineral wool

To EN 13501, fire rating class A1, non-combustible
RAL quality mark RAL-GZ 388
Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EG
Faced with glass fibre fabric as a protection against erosion through airflow velocities of up to 20 m/s
Inert to fungal and bacterial growth

Standards and guidelines

Insertion loss and sound power level of air-regenerated noise tested to ISO 7235
Sound reduction index determined according to EN ISO 10140-2 und EN ISO 717-1

Maintenance

Maintenance-free as construction and materials are not subject to wear

Technical information

Function, TECHNICAL DATA, QUICK SIZING, SPECIFICATION TEXT, ORDER CODE, Related products

Schematic illustration of NL 00100015_0

① Casing
② Bird mesh
③ Absorption material
④ Glass fibre fabric
⑤ Perforated sheet metal

Functional description

External weather louvres are externally mounted air transfer devices for the fresh air and exhaust air of air conditioning systems. They are installed in external walls and façades. Their narrowly arranged blades give good protection against the direct ingress of rain as well as against leaves and birds.

Under certain unfavourable conditions, such as heavy rain, and depending on the airflow velocity it might happen that slight quantities of water enter together with the air.

This is why the airflow velocity in fresh air openings should not exceed 2 – 2.5 m/s.

Installation into rectangular ducts (installation types A and B)

A Exhaust air
B Fresh air

Quick sizing tables provide a good overview of the volume flow rates with an airflow velocity of 2.5 m/s. Values for intermediate widths can be interpolated. Precise intermediate values and volume flow rates for other airflow velocities can be calculated with our Easy Product Finder design programme.

The sound power levels L_WA apply to external weather louvres with a flow cross section of 1 m².

NL, width 300 – 1050 mm, volume flow rate at max. 2.5 m/s

Height	Width [mm]
Height	300		450		600		750		900		1050
mm	l/s	m³/h	l/s	m³/h	l/s	m³/h	l/s	m³/h	l/s	m³/h	l/s	m³/h
450	120	432	180	648	240	864	300	1080	360	1296	420	1512
600	240	864	360	1296	480	1728	600	2160	720	2592	840	3024
750	360	1296	540	1944	720	2592	900	3240	1080	3888	1260	4536
900	480	1728	720	2592	960	3456	1200	4320	1440	5184	1680	6048
1050	600	2160	900	3240	1200	4320	1500	5400	1800	6480	2100	7560
1200	720	2592	1080	3888	1440	5184	1800	6480	2160	7776	2520	9072
1350	840	3024	1260	4536	1680	6048	2100	7560	2520	9072	2940	10584
1500	960	3456	1440	5184	1920	6912	2400	8640	2880	10368	3360	12096
1650	1080	3888	1620	5832	2160	7776	2700	9720	3240	11664	3780	13608
1800	1200	4320	1800	6480	2400	8640	3000	10800	3600	12960	4200	15120
1950	1320	4752	1980	7128	2640	9504	3300	11880	3960	14256	4620	16632
2100	1440	5184	2160	7776	2880	10368	3600	12960	4320	15552	5040	18144
2250	1560	5616	2340	8424	3120	11232	3900	14040	4680	16848	5460	19656

NL, width 1200 – 1800 mm, volume flow rate at max. 2.5 m/s

Height	Width [mm]
Height	1200		1350		1500		1650		1800
mm	l/s	m³/h	l/s	m³/h	l/s	m³/h	l/s	m³/h	l/s	m³/h
450	480	1728	540	1944	600	2160	660	2376	720	2592
600	960	3456	1080	3888	1200	4320	1320	4752	1440	5184
750	1440	5184	1620	5832	1800	6480	1980	7128	2160	7776
900	1920	6912	2160	7776	2400	8640	2640	9504	2880	10368
1050	2400	8640	2700	9720	3000	10800	3300	11880	3600	12960
1200	2880	10368	3240	11664	3600	12960	3960	14256	4320	15552
1350	3360	12096	3780	13608	4200	15120	4620	16632	5040	18144
1500	3840	13824	4320	15552	4800	17280	5280	19008	5760	20736
1650	4320	15552	4860	17496	5400	19440	5940	21384	6480	23328
1800	4800	17280	5400	19440	6000	21600	6600	23760	7200	25920
1950	5280	19008	5940	21384	6600	23760	7260	26136	7920	28512
2100	5760	20736	6480	23328	7200	25920	7920	28512	8640	31104
2250	6240	22464	7020	25272	7800	28080	8580	30888	9360	33696

NL, differential pressure and sound power level

v	v_t	Installation type
v	v_t	A		B		C		D
v	v_t	Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA
m/s		Pa	dB(A)	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)
1.5	0.2 – 0.4	2	<15	2	<15	2	<15	1	<15
2	0.2 – 0.6	4	<15	4	<15	4	<15	4	<15
4	0.4 – 1.2	18	32	14	28	18	29	14	27
6	0.7 – 1.7	40	44	30	40	40	41	28	39
8	0.9 – 2.3	70	52	50	48	65	49	50	47
10	1.1 – 2.9	110	58	80	54	105	55	75	53

NL-H, Differential pressure and sound power level

v	v_t	Installation type
v	v_t	A		B		C		D
v	v_t	Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA
m/s		Pa	dB(A)	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)
1	0.1 – 0.3	2	<15	2	<15	2	<15	2	<15
2	0.2 – 0.6	8	26	6	19	6	18	6	18
3	0.3 – 0.9	16	37	12	30	12	29	12	29
4	0.4 – 1.2	26	45	20	38	20	37	20	37
5	0.6 – 1.5	40	52	30	45	30	44	30	44
7	0.8 – 2.0	80	61	65	54	60	53	60	53

Rectangular acoustic louvres as a protection of air conditioning systems against the direct ingress of rain, leaves and birds into fresh air and exhaust air openings.

Ready-to-install component which consists of a border, aerofoil rain defence blades, and a wire mesh at the rear.

Insertion loss measured according to ISO 7235, sound reduction index measured according to EN ISO 10140-2.

Special characteristics

Two construction depths for normal and demanding acoustic requirements
Aerofoil blades
Absorption material retained by perforated sheet metal

Materials and surfaces

Casing and blades made of galvanised sheet steel (S) or aluminium (A)
Perforated sheet metal to retain absorption material is made of galvanised sheet steel (NL, NL-H)
Bird mesh made of galvanised steel (NL, NL-H)
Absorption material is mineral wool (NL, NL-H)

Mineral wool

To EN 13501, fire rating class A1, non-combustible
RAL quality mark RAL-GZ 388
Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EG
Faced with glass fibre fabric as a protection against erosion through airflow velocities of up to 20 m/s
Inert to fungal and bacterial growth

Construction

S: Galvanised sheet steel
A: Aluminium

Technical data

Nominal sizes: 300 × 450 to 1800 × 2250 mm
Width subdivided: up to 3600 mm
Height subdivided: Up to 4500 mm
Volume flow rate range (undivided construction): 120 – 9360 l/s or 432 – 33696 m³/h at 2.5 m/s
Total differential pressure – exhaust air (single louvre): 30 – 100 Pa (depending on height) at 1.75 m/s
Total differential pressure – fresh air (single louvre): 25 – 75 Pa (depending on height) at 1.75 m/s

Sizing data

V _______________________ [m³/h]
Δp_t _______________________ [Pa]

Air-regenerated noise

L_WA _______________________ [dB(A)]

Weighted sound reduction index

R_W _______________________ [dB]

This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design programme.

Type
NL Acoustic louvre

Acoustic performance
       No entry: standard requirement, single louvre
H       High, double bank
D       Non-active section

Material
S Galvanised steel
A Raw aluminium

Nominal size [mm]
B × H

Surface
No entry: standard construction
P1 Powder-coated, RAL Classic colour

       Gloss level
       RAL 9010 50 %
       RAL 9006 30 %
       All other RAL colours 70 %

Order example: NL–H–S/1050×750

Acoustic performance	High
Material	Galvanised steel
Nominal size	1050×750 mm
Surface	Standard construction

Variants, Dimensions and weight

Variant

Acoustic louvre

Parts and characteristics

Casing
Sound absorbing blades
Bird mesh

Construction features

Aerofoil blades, 150 mm blade pitch
Casing with fixing holes for wall installation
Absorption material faced with glass fibre fabric and retained by perforated sheet metal
Bird mesh 12 × 12 × 1 mm

Materials and surfaces

Casing and blades made of galvanised sheet steel (S) or aluminium (A)
Perforated sheet metal to retain absorption material is made of galvanised sheet steel
Bird mesh made of galvanised steel
Absorption material is mineral wool

Mineral wool

To EN 13501, fire rating class A1, non-combustible
RAL quality mark RAL-GZ 388
Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EG
Faced with glass fibre fabric as a protection against erosion through airflow velocities of up to 20 m/s
Inert to fungal and bacterial growth

NL-H

Variant

High performance acoustic louvre (double bank)

Parts and characteristics

Casing
Sound absorbing blades
Bird mesh

Construction features

Aerofoil blades, 150 mm blade pitch
Casing with fixing holes for wall installation
Absorption material faced with glass fibre fabric and retained by perforated sheet metal
Bird mesh 12 × 12 × 1 mm

Materials and surfaces

Casing and blades made of galvanised sheet steel (S) or aluminium (A)
Perforated sheet metal to retain absorption material is made of galvanised sheet steel
Bird mesh made of galvanised steel
Absorption material is mineral wool

Mineral wool

To EN 13501, fire rating class A1, non-combustible
RAL quality mark RAL-GZ 388
Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EG
Faced with glass fibre fabric as a protection against erosion through airflow velocities of up to 20 m/s
Inert to fungal and bacterial growth

NL-D

Variant

Non-active section for a uniform appearance

Parts and characteristics

Casing
Blades
Rear blanking plate

Construction features

Aerofoil blades, 150 mm blade pitch
Casing with fixing holes for wall installation

Materials and surfaces

Casing and blades made of galvanised sheet steel (S) or aluminium (A)

Materials

Part	Order code detail	Material	Notes
Casing and blades	S	Galvanised sheet steel
Casing and blades	A	Aluminium
Perforated sheet metal to retain absorption material	–	Galvanised sheet steel	Only NL, NL-H
Bird mesh	–	Galvanised steel	Only NL, NL-H
Absorption material	–	Mineral wool	Only NL, NL-H

Surfaces

Part	Order code detail	Surface	Notes
Casing and blades	–	Untreated
Casing and blades	P1-RAL ...	Powder-coated, RAL colour ... CLASSIC

NL-S, Weight

H	B [mm]
H	300	450	600	750	900	1050	1200	1350	1500	1650	1800
mm	kg
450	7	10	13	16	19	23	26	29	32	36	39
600	9	13	17	22	26	30	35	39	43	48	52
750	11	16	22	27	32	38	43	49	54	59	65
900	13	19	26	32	39	45	52	58	65	71	78
1050	15	23	30	38	45	53	61	68	76	83	91
1200	17	26	35	43	52	61	69	78	86	95	104
1350	19	29	39	49	58	68	78	88	97	107	117
1500	22	32	43	54	65	76	86	97	108	119	130
1650	24	36	48	59	71	83	95	107	119	131	143
1800	26	39	52	65	78	91	104	117	130	143	156
1950	28	42	56	70	84	98	112	126	140	154	169
2100	30	45	61	76	91	106	121	136	151	166	181
2250	32	49	65	81	97	113	130	146	162	178	194

NL-A, weight

H	B [mm]
H	300	450	600	750	900	1050	1200	1350	1500	1650	1800
mm	kg
450	5	7	10	12	14	17	19	21	24	26	28
600	6	10	13	16	19	22	25	28	32	35	38
750	8	12	16	20	24	28	32	35	39	43	47
900	10	14	19	24	28	33	38	43	47	52	57
1050	11	17	22	28	33	39	44	50	55	61	66
1200	13	19	25	32	38	44	50	57	63	69	76
1350	14	21	28	35	43	50	57	64	71	78	85
1500	16	24	32	39	47	55	63	71	79	87	95
1650	17	26	35	43	52	61	69	78	87	95	104
1800	19	28	38	47	57	66	76	85	95	104	113
1950	21	31	41	51	61	72	82	92	102	113	123
2100	22	33	44	55	66	77	88	99	110	121	132
2250	24	35	47	59	71	83	95	106	118	130	142

NL-H-S, weight

H	B [mm]
H	300	450	600	750	900	1050	1200	1350	1500	1650	1800
mm	kg
450	13	19	26	32	39	45	52	58	65	71	78
600	17	26	35	43	52	61	69	78	86	95	104
750	22	32	43	54	65	76	86	97	108	119	130
900	26	39	52	65	78	91	104	117	130	143	156
1050	30	45	61	76	91	106	121	136	151	166	181
1200	35	52	69	86	104	121	138	156	173	190	207
1350	39	58	78	97	117	136	156	175	194	214	233
1500	43	65	86	108	130	151	173	194	216	238	259
1650	48	71	95	119	143	166	190	214	238	261	285
1800	52	78	104	130	156	181	207	233	259	285	311
1950	56	84	112	140	169	197	225	253	281	309	337
2100	61	91	121	151	181	212	242	272	302	333	363
2250	65	97	130	162	194	227	259	292	324	356	389

NL-H-A, weight

H	B [mm]
H	300	450	600	750	900	1050	1200	1350	1500	1650	1800
mm	kg
450	10	14	19	24	28	33	38	43	47	52	57
600	13	19	25	32	38	44	50	57	63	69	76
750	16	24	32	39	47	55	63	71	79	87	95
900	19	28	38	47	57	66	76	85	95	104	113
1050	22	33	44	55	66	77	88	99	110	121	132
1200	25	38	50	63	76	88	101	113	126	139	151
1350	28	43	57	71	85	99	113	128	142	156	170
1500	32	47	63	79	95	110	126	142	158	173	189
1650	35	52	69	87	104	121	139	156	173	191	208
1800	38	57	76	95	113	132	151	170	189	208	227
1950	41	61	82	102	123	143	164	184	205	225	246
2100	44	66	88	110	132	154	176	199	221	243	265
2250	47	71	95	118	142	165	189	213	236	260	284

NL-D-S, weight

H	B [mm]
H	300	450	600	750	900	1050	1200	1350	1500	1650	1800
mm	kg
450	3	5	7	8	10	11	13	15	16	18	19
600	4	7	9	11	13	15	17	19	22	24	26
750	5	8	11	14	16	19	22	24	27	30	32
900	7	10	13	16	19	23	26	29	32	36	39
1050	8	11	15	19	23	27	30	34	38	42	45
1200	9	13	17	22	26	30	35	39	43	48	52
1350	10	15	19	24	29	34	39	44	49	54	58
1500	11	16	22	27	32	38	43	49	54	59	65
1650	12	18	24	30	36	42	48	54	59	65	71
1800	13	19	26	32	39	45	52	58	65	71	78
1950	14	21	28	35	42	49	56	63	70	77	84
2100	15	23	30	38	45	53	61	68	76	83	91
2250	16	24	32	41	49	57	65	73	81	89	97

NL-D-A, weight

H	B [mm]
H	300	450	600	750	900	1050	1200	1350	1500	1650	1800
mm	kg
450	2	4	5	6	7	8	10	11	12	13	14
600	3	5	6	8	10	11	13	14	16	17	19
750	4	6	8	10	12	14	16	18	20	22	24
900	5	7	10	12	14	17	19	21	24	26	28
1050	6	8	11	14	17	19	22	25	28	30	33
1200	6	10	13	16	19	22	25	28	32	35	38
1350	7	11	14	18	21	25	28	32	35	39	43
1500	8	12	16	20	24	28	32	35	39	43	47
1650	9	13	17	22	26	30	35	39	43	48	52
1800	10	14	19	24	28	33	38	43	47	52	57
1950	10	15	21	26	31	36	41	46	51	56	61
2100	11	17	22	28	33	39	44	50	55	61	66
2250	12	18	24	30	35	41	47	53	59	65	71

Installation details, Basic information and nomenclature

Wall installation

① Mastic, to be provided by others

Installation and commissioning

Installation either without installation subframe or with timber subframe, fixing angles, or steel frame made of angle sections (to be provided by others)
Install subdivided constructions either horizontally next to each other or vertically on top of each other
Seal perimeter gap with mastic
Fix cover strips

Installation information

Casing with slotted holes of 10 × 15 mm along the side panels

Downloads

product information

Product data sheet Type NL

Product data sheet 1.5 MB pdf

certificates

Declaration of hygiene conformity Type NL

NL_HC_2024_05_DE_en Hygiene certificate 1.8 MB pdf
Non-CE Manufacturer's statement NL

NL_NotCE_2022_02_08_14_06_48_DE_en Certificate 1.8 MB pdf

TROX Services

Productsearch A-Z Find out quickly and simply.

TROX Easy Product Finder Fast. Reliable. Innovative.

Tour de Competence Competence - exciting staged.

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. In addition, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

STATISTICS AND WEBSITE ANALYSIS

These cookies make it possible to collect data for statistics and analysis so that TROX can measure the performance of the websites visited, identify technical problems and find starting points for optimisation. They may be set by us or by third parties whose services we use on our sites. Users also help to identify, for example, which pages are used most frequently or only rarely or how people navigate between web pages. All information used by third parties is aggregated and anonymised.

Nominal sizes	300 × 450 to 1800 × 2250 mm
Width subdivided	Up to 3600 mm
Height subdivided	Up to 4500 mm
Volume flow rate range (undivided construction)	120 – 9360 l/s or 432 – 33696 m³/h at max. 2.5 m/s

Variant	Centre frequency fm [Hz]
Variant	63	125	250	500	1000	2000	4000	8000
Variant	D_e
Variant	dB
NL	3	4	7	8	13	15	13	15
NL-H	3	6	9	16	21	24	24	30

NL

With sound reduction characteristics

Application

Description

Technical information

Function, TECHNICAL DATA, QUICK SIZING, SPECIFICATION TEXT, ORDER CODE, Related products

Variants, Dimensions and weight

Installation details, Basic information and nomenclature

Downloads

product information

Product data sheet Type NL

certificates

Declaration of hygiene conformity Type NL

Non-CE Manufacturer's statement NL

TROX Services

TECHNICALLY NECESSARY

STATISTICS AND WEBSITE ANALYSIS

CONVENIENCE AND PERSONALISATION

FOR THE BEST TROX EXPERIENCE