00132911_0
TDV-SA-Q-Z/600


00134457_0
Circular diffuser face


00134461_0
White air control blades


00140668_0
Horizontal two-way air discharge


00128810_0
Horizontal one-way air discharge


00140625_0
Horizontal swirling air discharge


00132911_0
00134457_0
00134461_0
00140668_0
00128810_0
00140625_0

TDV-SILENTAIR

WITH VERY LOW SOUND POWER LEVEL FOR COMFORT ZONES AND INDIVIDUALLY MANUALLY ADJUSTABLE AIR CONTROL BLADES

Circular and square ceiling swirl diffusers

  • Nominal sizes 12, 16, 20, 24 in
  • Volume flow rate range 23 - 627 cfm
  • Diffuser face made of galvanized sheet steel, powder-coated
  • For supply and extract air
  • For variable and constant volume flows
  • For all types of ceiling systems, and with an extended border also suitable for freely suspended installation
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Air control blades can be adjusted individually for adjusting the air pattern
  • Ideal for comfort zones


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colors, air control blades in black or white
  • Horizontal or vertical duct connection
  • Plenum box with cord-operated damper blade and pressure tap

Application

Application

  • Type TDV-SilentAIR ceiling swirl diffusers are used as supply air or extract air diffusers for comfort zones
  • Attractive design element for building owners and architects with demanding aesthetic requirements
  • Horizontal swirling supply air discharge for mixed flow ventilation
  • The efficient swirl creates high induction levels, thereby rapidly reducing the temperature difference and airflow velocity (supply air variant)
  • Individually adjustable air control blades to meet individual requirements
  • For variable and constant volume flows
  • For supply air to room air temperature differences from –21.6 to +18 °F
  • For room heights up to 13.3 ft (lower edge of suspended ceiling)
  • For all types of ceiling systems
  • With an extended border also suitable for freely suspended installation (supply air variant)

Special characteristics

  • Very low sound power level, ideal for comfort zones
  • Individually manually adjustable air control blades
  • For all types of ceiling systems, and with an extended border also suitable for freely suspended installation
  • Black or white air control blades

Nominal sizes

  • 12, 16, 20, 24

Description

Variants

  • TDV-SA-Q: Square diffuser face
  • TDV-SA-R: Circular diffuser face
  • TDV-SA-*-Z: Supply air
  • TDV-SA-*-A: Extract air


Connection

  • H: Horizontal duct connection
  • V: Vertical duct connection

Parts and characteristics

  • Circular or square diffuser face
  • Diffuser face with individually manually adjustable air control blades
  • Simple installation of the diffuser face due to central fixing screw with decorative cap
  • Damper blade for volume flow rate balancing (optional)

Attachments

  • M: Damper blade for volume flow rate balancing
  • MN: Pressure tap and cord-operated damper blade for volume flow rate balancing with the diffuser face in place

Accessories

  • Lip seal

Construction features

  • Inlet suitable for circular ducts to ANSI/SMACNA 006-2006 and EN 1506 or EN 13180
  • Inlet with groove for lip seal (if accessory lip seal has been ordered)

Materials and surfaces

  • Diffuser face made of galvanized sheet steel
  • V, H: Plenum box and cross bar made of galvanised sheet steel
  • X: Plenum box made of plastic and galvanized sheet steel
  • Air control blades made of plastic, UL 94, V-0, flame retardant
  • Lip seal made of rubber
  • Exposed diffuser face powder-coated RAL 9010, pure white
  • P1: Powder-coated, RAL CLASSIC colour
  • Air control blades for supply air similar to RAL 9005, black; extract air variant without air control blades
  • Q11: Air control blades for extract air similar to RAL 9005, black
  • Q21: Air control blades for supply air and extract air similar to RAL 9010, white

Standards and guidelines

  • Sound power level of the air-regenerated noise measured according to EN ISO 5135

Maintenance

  • Maintenance-free as construction and materials are not subject to wear
  • Inspection and cleaning to VDI 6022

Downloads

product information

operation manuals

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +61 (02) 8923 2551

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +61 (02) 8923 2551

Contact

We are here for you

Please specify your message and type of request.
Tel.: +61 (02) 8923 2551

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +61 (02) 8923 2551